Impact of various heat sources on the transient heat transfer rate in a 3D cylinder consisting of parts with different thermal conductivity coefficients
Year: 2024
Type: article
Abstract: Numerical analysis of time-dependent conductive heat transfer in three-dimensional solid bodies with a heat source is important in their use in various industries. In this article, an attempt has been made to investigate this issue for a cylinder consisting of four equal pieces with different thermal conductivity coefficients and heat sources, and conclusions have been drawn. The geometry of the cylinder consists of two lower (first) and upper (second) layers. In the lower layer of two solid bodies, one is a piece of rubber with a thermal conductivity coefficient of K 1 =0.16 w / m ○ k and the other is a piece of walnut wood with a thermal conductivity coefficient of K 2 =0.077 w / m ○ k and two solid objects are used in the upper layer. One is a piece of polyurethane with a thermal conductivity coefficient of K 3 =0.02 w / m ○ k and the other is a piece of cork with a thermal conductivity coefficient of K 4 =0.04 w / m ○ k . There are four heat source mechanisms: constant value, linear, quadratic, and sinusoidal or periodic heat source with a certain frequency. All the surfaces of the cylinder walls in the time interval 0 ≤ t ≤ 10 s 10, T = 0 are assumed. The obtained results show that the temperature distribution when the value of the heat source is constant affects a larger area, and the highest increase in temperature in the direction of the z-axis belongs to the constant, quadratic, sinusoidal and linear heat source, respectively.
Language: English
Subfield: Computational Mechanics
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $2,010
OpenAlex ID: W4401626180