Work

In-situ formed Li2O and an artificial protective layer on copper current collectors to enhance the cycling stability of lithium metal anode batteries

Year: 2024

Type: article

Abstract: In this study, we present a facile one-step method for the thermal treatment of commercial Cu foils, leading to the growth of Cu 2 O and CuO nanoparticles in an air atmosphere, resulting in the coating of an artificial protective layer on the copper foil surface. The as-prepared CuO/Cu 2 O nanoparticles exhibit a spherical morphology, providing ample active sites to improve uniform lithium plating and cyclic stability by building a highly stable In-situ Li 2 O-rich solid-electrolyte interphase (ISEI). The artificial solid-electrolyte interphase (ASEI) protective layer contains graphene oxide (GO) as a filler with PVDF-HFP and lithium Nafion polymers, enhances Li + ion migration, which reduces volume expansion and stabilizes the interface, preventing unwanted side reactions between active lithium and electrolytes by facilitating controlled lithium deposition underneath. For integration into an anode-less full cell based on a 2032-type coin cell, alongside a lithium iron phosphate (LFP) cathode, the ISEI oxide layer was grown on a Cu foil electrode (denoted as Cu-30) via a thermal treatment at 320 °C in air for 30 min and coated ASEI (denoted as GO@Cu-30). This cell demonstrated remarkable electrochemical performance. After 250 cycles at 0.5C, it exhibited an outstanding capacity retention of 93.12 % with 99.92 % CE, significantly surpassing the performance of a bare Cu foil, which showed a capacity retention of only 9.54 % with CE of 98.77 %. This work highlights the potential of a simple thermally treated Cu foil as a current collector to overcome the Anode-less lithium metal battery (ALMB) challenges associated with high-energy-density demand.

Source: Journal of Energy Storage

DOI: 10.1016/j.est.2024.113508

Authors: Kainat Darwaish, Yi-Shiuan Wu, She-Huang Wu, Jeng-Kuei Chang, Rajan Jose, Chun-Chen Yang