Work

Effects of specimen size and loading rate on the mechanical property of Bentonil-WRK bentonite for engineered barrier system

Year: 2024

Type: article

Abstract: This study aims to investigate the effects of specimen size and loading rate on the mechanical property of Bentonil-WRK bentonite buffer material for engineered barrier system. Highly instrumented unconfined compressive strength tests were performed on cylindrical specimens prepared using cold isostatic pressing (CIP) technique at varying testing conditions: (a) CIP pressures of 29.43 MPa, 39.24 MPa, and 58.86 MPa, (b) specimen sizes of 30 × 60mm, 40 × 80mm, and 50 × 100mm, and (c) loading rates of 0.5 %/min, 1.0 %/min, and 1.5 %/min. As CIP pressure increases, the unconfined compressive strength ( q u ), failure strain ( ε f ), and elastic modulus ( E ) of Bentonil-WRK increase similar to Gyeongju compacted bentonite (KJ-II). Increase in diameter results in a decrease in q u and ε f, and increase in E . Minimal effect of loading rate was observed on q u and ε f . However, increasing loading rate tends to increase E . In addition, decrease in diameter increases the elastic threshold axial strain ( ε e,th ). Increase in diameter and loading rate slightly increases Poisson's ratio . Prediction models are provided for assessing the effects of specimen diameter on q u and ε f . Furthermore, correlation models of q u to ρ d and E are proposed for Bentonil-WRK bentonite buffer material.

Source: Nuclear Engineering and Technology

DOI: 10.1016/j.net.2024.08.041

Authors: Ivan Jeff Navea, Jebie Balagosa, Se Hee Han, Seok Yoon, Yun Wook Choo

Institutions: Kongju National University, Korea Atomic Energy Research Institute

Language: English

Topic: Rock Mechanics and Modeling

Subfield: Mechanics of Materials

Field: Engineering

Domain: Physical Sciences

Open Access status: gold

Estimated APC paid: $200

Funders: Ministry of Science, ICT and Future Planning, National Research Foundation of Korea