Work

Jet on demand—A pneumatically driven molten metal jetting method for printing crack-free aluminum components

Year: 2024

Type: article

Abstract: Additive manufacturing (AM) of many traditional aluminum alloys is difficult due to hot cracking during cooling, which motivates investigating alternative AM methods that can mitigate this challenge. Here we demonstrate a new pneumatically driven molten metal jetting (MMJ) AM technique which uses a longer pressure pulse width to produce a jet of liquid metal that reaches the heated build plate. The “jet on demand” technique is utilized to build Al-6061 parts on heated build plates. Due to the large thermal mass contained in each jet, excellent adhesion is observed between droplets and layers while still maintaining dimensional control to produce parts. While as-printed parts exhibit different microstructure and hardness than traditional Al-6061, both microstructure and hardness are restored to traditionally processed values through a traditional T6 heat treatment. We observe that high build plate temperatures allow for lower solidification rates and eliminate hot cracking. These results point to a method for additively manufacturing traditional aluminum or other alloys that cannot currently be additively manufactured due to hot cracking.

Source: Additive Manufacturing Letters

DOI: 10.1016/j.addlet.2024.100240

Authors: Eric S. Elton, Kellen D. Traxel, Andrew J. Pascall, Jason R. Jeffries

Institution: Lawrence Livermore National Laboratory

Language: English

Topic: Additive Manufacturing Materials and Processes

Subfield: Mechanical Engineering

Field: Engineering

Domain: Physical Sciences

Open Access status: gold

Estimated APC paid: $1,250

Funders: U.S. Department of Energy, Lawrence Livermore National Laboratory