Effect of laser parameters and shielding gas flow on co-axial photodiode-based melt pool monitoring signals in laser powder bed fusion
Year: 2024
Type: article
Abstract: • Laser power has positive linear correlation with photodiode signal. • Scanning speed has non-linear (y = ax –b ) correlation with photodiode signal. • Focus position, scanning angle and shielding gas flow produce combinatorial effect. • Presence and removal of the vapor plume has crucial role on the photodiode signal. Melt pool monitoring using co-axial photodiodes is increasingly used for online quality monitoring in PBF-LB AM. However, the fundamental correlations between different processing conditions and the co-axial photodiode signals are not well understood. In this study the impact of laser parameters and the shielding gas flow speed on co-axial photodiode-based melt pool monitoring signals is established. It is shown that laser power has positive linear correlation with the photodiode signal, while the correlation with scanning speed is non-linear in the form of y =ax –b . The focal point position, scanning orientation and shielding gas flow speed have highly non-linear response on the photodiode signal, depending on the combinatorial effects of the parameters. These underlying physical correlations should be carefully assessed and taken into consideration when trying to establish correlations between photodiode-based melt pool monitoring signal and defect formation in the PBF-LB process.
Source: Additive Manufacturing Letters
Author: Joni Reijonen
Institutions: University of Turku, VTT Technical Research Centre of Finland
Language: English
Subfield: Mechanical Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $1,155
Funder: Teknologian Tutkimuskeskus VTT
OpenAlex ID: W4402635136