Substoichiometric La0.8MnO3-based nanocomposites for PGM-free activation of CH4: Ni or Cu? Surface or bulk?
Year: 2024
Type: article
Abstract: • Ni 2+ has a higher solubility than Cu 2+ at the B-site of La 0.8 MnO 3 perovskite. • Cu is more reducible and more easily exsolvable than Ni from perovskite lattice. • CH 4 oxidation mostly enhanced by Ni surface deposition and Cu exsolution from bulk. • Better long-term stability of Cu exsolved with respect to Ni deposited nanoparticles. Methane is a renewable fuel when derived from biogas upgrading or by CO 2 capture and utilization, with the possibility of fully replacing natural gas in the already established gas infrastructure and engines. However, being a potent greenhouse gas, its use as fuel demands a sustainable activation procedure, to convert any residual traces of unburned CH 4 into CO 2 , a challenging reaction especially at near-stoichiometric conditions typical of Three-Way Catalytic systems (TWC). To avoid expensive noble metals, we developed cheaper alternative catalysts: A-site deficient LaMnO 3 -based nanocomposites incorporating Ni and Cu. These elements were introduced either as B-site dopants in the perovskite lattice or deposited via Ammonia-driven Deposition-Precipitation (ADP) on the perovskite surface, in both cases yielding metal nanoparticles (NPs) after a reductive treatment. Characterization encompassed various techniques: XRD, N 2 physisorption, SEM-EDX, XPS, H 2 -TPR, HAADF STEM-EDX. CH 4 oxidation to CO 2 under stoichiometric O 2 served as the probe reaction, as model for TWC conditions in methane-fed engines. The LaMn-perovskite itself displayed a promising activity thanks to favourable morphological and redox features (50 % and 90 % CH 4 conversion at 581 °C and 678 °C, respectively); further improvements could be obtained upon Ni and Cu loading. The best performances were achieved by: i) the catalyst prepared by Ni-ADP (50 % and 90 % CH 4 conversion at 517 °C and 635 °C), featuring high Ni surface concentration and NPs density and a synergy with the perovskite support, as opposed to the low Ni surface concentration on B-site doped samples; ii) the reduced Cu-doped catalyst (50 % and 90 % CH 4 conversion at 508 °C and 645 °C), thanks to the high activity of reduced Cu species, the low NPs size and good metal-support interaction, in contrast to the strong NPs agglomeration of the Cu-ADP catalyst. Among the two most active catalysts, a better long-term stability was retained by the Cu-doped sample. This work laid the foundation for the development of alternative CH 4 oxidation catalysts at the stoichiometric air-to-fuel ratio, cheaper than commercial Pd-based ones.
Source: Fuel
Authors: Andrea Osti, Lorenzo Rizzato, Simone Costa, Jonathan Cavazzani, Antonella Glisenti
Language: English
Subfield: Materials Chemistry
Field: Materials Science
Domain: Physical Sciences
Open Access status: hybrid
Estimated APC paid: $4,200
OpenAlex ID: W4403155876