Work

Experimental and numerical investigations on the tensile response of pin-loaded carbon fibre reinforced polymer straps

Year: 2024

Type: article

Abstract: Carbon fibre reinforced polymer (CFRP) pin-loaded looped straps are increasingly being used in a range of structural load-bearing applications, notably for bridge hanger cables in network arch rail and highway bridges. The static performance of such CFRP straps is investigated through experimental and numerical analyses. Finite element (FE) models based on both one-eighth and half pin-strap assembly geometries were modelled. The resulting strains, stresses, and applied loads were compared against experimental data obtained using Digital Image Correlation, Distributed Fibre Optic Sensing (DFOS), and Fibre Bragg Grating (FBG) Sensing. The FE models effectively captured local strain distributions around the vertex area, close to the pin ends of the straps, as well as in the mid-shaft region, and aligned reasonably with experimental observations. The half FE model accurately predicted the overall strain distribution when compared to DFOS data; however, higher strain magnitudes (by 0.45–10.2 %) and larger strain reductions were observed in some locations. Regarding failure loads, the FE models agreed well with Schürmann's analytical solution and the maximum stress criterion, exhibiting less than 2.5 % deviations from the experimental data. Furthermore, the predicted onset of strap failure (by delamination) in the half model agreed with experimental values, with a maximum variance of 9.2 %. • Excellent strain correlation between FE models and optical fibres. • FE models effectively captured the overall strain distribution with deviations between 2 and 10 % from optical fibre data. • Schürmann's failure criterion and maximum stress criterion deviated less than 2.5 % from experimental data. • Predicted onset of strap failure by delamination in the half model agreed with experiments, with a maximum variance of 9.2%.

Source: Composites Science and Technology

DOI: 10.1016/j.compscitech.2024.110915

Authors: Danijela Stankovic, James R. Davidson, Valentin Ott, Luke A. Bisby, Giovanni P. Terrasi

Institutions: Swiss Federal Laboratories for Materials Science and Technology, University of Sheffield, University of Edinburgh

Language: English

Topic: Mechanical Behavior of Composites

Subfield: Mechanics of Materials

Field: Engineering

Domain: Physical Sciences

SDG: Industry, innovation and infrastructure

Open Access status: hybrid

Estimated APC paid: $4,480