Work

Packed-Bed Chemical Looping Reforming for Renewable Syngas Production from Glycerol with Ni_Fe-Based Oxygen Carriers/Catalysts

Year: 2024

Type: article

Abstract: A chemical looping (CL) reactor can provide the energy required to produce syngas from the reforming of glycerol. This can be done through the dynamic operation of packed-bed (PB) reactors that consecutively cycle in a three-stage process that includes oxidation, reduction, and a reforming stage. In this work, Ni-/Fe-based materials were synthesized, characterized, and tested as oxygen carriers and glycerol reforming catalysts during chemical looping reforming in packed-bed (CLR-PB) reactors. Two materials were prepared via coprecipitation/impregnation with different Ni loads (4.3 and 12 wt %) and similar Fe loadings (9.9 and 8.5% wt) and later on granulated to produce particles in a size cut of 0.6-1 mm. The materials presented high catalytic activity in a wide range of reforming temperatures (650-800 °C), being able to achieve over 95% glycerol-to-gas molar conversion in very short gas/solid contact times and at relevant conditions suitable for process scale-up. The results indicated that it is possible to produce materials with a low Ni load, which present sufficient catalytic activity and thermochemical capacity thanks to the presence of Fe, to operate under the glycerol CLR-PB configuration.

Source: Energy & Fuels

DOI: 10.1021/acs.energyfuels.4c02863

Authors: Claudia Navarro, Adam Zaidi, Christopher de Leeuwe, Vincenzo Spallina, Gemma Grasa

Institutions: Consejo Superior de Investigaciones Científicas, Instituto de Carboquímica, University of Manchester

Language: English

Topic: Chemical Looping and Thermochemical Processes

Subfield: Biomedical Engineering

Field: Engineering

Domain: Physical Sciences

SDGs: Affordable and clean energy, Responsible consumption and production, Industry, innovation and infrastructure

Open Access status: hybrid

Estimated APC paid: $4,500