Work

Parameter Estimations on Measurement Accuracy for Thermal Conductivity of Wood Using the Transient Plane Source Method

Year: 2024

Type: article

Abstract: In order to enhance the reliability and accuracy of the results from the transient plane source (TPS) method for measuring the thermal conductivity of wood, this paper investigates setting parameters and measurement methods to improve measurement accuracy. Criteria are proposed to determine the optimal parameters such as the power output, heating time, and time window. The measurement results of the TPS method and the HFM method are compared. The results show that the total to characteristic time, temperature increase in the probe, mean deviation, and temperature drift graph are valid indicators for evaluating the detection reliability of the TPS method. The optimal parameters for measuring the thermal conductivity of wood using the TPS method are as follows: power output of 0.05 or 0.1 W, heating time of 120 s, and time window covering 60% to 80% of the heating time. The thermal conductivity measured with the TPS method was higher than that measured by the steady-state method in all grain angle directions. The standard uncertainties after optimization were 18.9% to 59.5% lower than before optimization. The optimized TPS measurement method can be applied to other tree species as well.

Source: Forests

DOI: 10.3390/f15101820

Authors: Hongxu Meng, Xinxin Yu, Bonan Chen, Pengyuan Ren, Jingyao Zhao

Institution: Northeast Forestry University

Language: English

Topic: Wood Treatment and Properties

Subfield: Building and Construction

Field: Engineering

Domain: Physical Sciences

Open Access status: gold

Estimated APC paid: $2,955

Funder: National Natural Science Foundation of China