Crystallization Behavior and Structure of CaO–SiO2–Al2O3 Melts Representing the Oxide Inclusions in Si‐Mn Deoxidized Steel
Year: 2024
Type: article
Abstract: For further optimization of the inclusion plasticization control process of Si‐Mn deoxidized steel, the crystallization behavior and structure of CaO–SiO2–Al2O3 system inclusions are investigated. The crystallization behavior of four typical low melting point CaO–SiO2–Al2O3 inclusions at 1000 to 1250 °C is studied by steel crucible isothermal heating experiment. The obtained results reveal that the glassy stability of the inclusions is high when the composition of low melting point inclusion is located in the eutectic region of tridymite, pseudowollastonite, and anorthite in the ternary phase diagram. However, when the composition of the inclusion is located in the eutectic region of melilite, pseudowollastonite, and anorthite, it is easy to undergo glass‐crystallization transformation and precipitate wollastonite and anorthite crystalline phases when isothermal heating at 1100 to 1200 °C. In addition, the crystallization mode of these inclusions is mainly surface crystallization, and the crystallization degree of inclusions increases with the increase of heat treatment temperature and time. The activation energy of crystallization and the content of nonbridging oxygen in the silicate structure NBO/T can be used to predict the crystallization ability of inclusions. The greater the activation energy of crystallization and the smaller the NBO/T value, the higher the glassy stability of the inclusions.
Source: steel research international
Authors: Qi Xu, Xubo Lei, Rodrigue Armel Muvunyi, Jianli Li
Language: English
Subfield: Mechanical Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: bronze
Awards: G2912182072, G432821561
OpenAlex ID: W4403657883