Work

Enhancing the Performance of Oxide‐Based Transverse Thermoelectric Generators by Optimized Internal Geometry

Year: 2024

Type: article

Abstract: In transverse thermoelectric generators (TTEGs), comprising an artificially anisotropic material formed by a layered and tilted structure of two materials, the induced thermoelectric voltage is generated perpendicular to the applied temperature gradient. The performance of TTEGs composed of alternate layers of La1.99Sr0.01CuO4 (LSCO) and silver (Ag), tilted at an angle φ, with metal‐to‐ceramic thickness ratio νt, is investigated. Improvement in performance is achieved by optimizing the internal geometry parameters, φ and νt of the tilted layered structure. The transverse power factor PFtr and figure‐of‐merit ZtrT of the artificially tilted material composite are analytically calculated and presented in color contours. Experimentally, a power output Pout of 14.5 mW at ΔT = 140 K is measured for a TTEG with φ = 66°, compared to 2.8 mW and 11 mW for generators with φ of 20° and 45°, respectively. Moreover, TTEGs with different values of νt are prepared. Furthermore, transverse multilayer thermoelectric generators (TMLTEG) with output power of 14.3 mW at ΔT = 225 K are fabricated utilizing the ceramic multilayer technology. It is demonstrated that the transverse thermoelectric effect using an artificial anisotropic material consisting of ceramic and metal can be explored for autonomous thermoelectric energy generation for low‐power applications.

Source: Advanced Functional Materials

DOI: 10.1002/adfm.202413166

Authors: Ahmed A. S. Ibrahim, Arne Bochmann, Romy Löhnert, Jörg Töpfer

Institution: Ernst Abbe University of Applied Sciences Jena

Language: English

Topic: Advanced Thermoelectric Materials and Devices

Subfield: Materials Chemistry

Field: Materials Science

Domain: Physical Sciences

SDG: Affordable and clean energy

Open Access status: hybrid

Estimated APC paid: $5,510