The Role of Carbon Content on the Microstructure of Rapidly Solidified Fe–Cr–Ni Duplex Steels
Year: 2024
Type: article
Abstract: In this research, the microstructure of three melt‐spinning ribbons with a weight‐based composition of Fe–25Cr–5Ni and varying carbon contents (0.02, 0.10, and 0.38 wt%) is evaluated. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) are used for microstructural characterization. SEM analyses consist of image acquisition and electron backscatter diffraction. TEM analyses consist of bright‐field image acquisition, selected area electron diffraction, high‐resolution TEM, and local chemical composition measurements by energy‐dispersive X‐ray spectrometry. According to the results, the ribbons show different microstructures resulting from different solidification paths. The ribbon containing 0.02%C presents a predominantly ferritic microstructure, and austenite solid‐state precipitation is not suppressed. It occurs as grain‐boundaries allotriomorphs and secondary Widmanstätten side plates. As a result of carbon additions, the ribbon containing 0.10%C shows a microstructure composed of nearly equal parts ferrite and austenite, along with M23C6 (M = Cr15.6Fe7.4) nanometric carbides. The cube‐on‐cube orientation relationship is found between M23C6 and austenite. Lastly, the ribbon containing 0.38%C exhibits austenitic microstructure with islands of ferrite surrounded by M7C3 (M = Cr4.14Fe2.86) carbides.
Source: steel research international
Institutions: Universidade de São Paulo, Lehigh University
Language: English
Subfield: Mechanical Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: hybrid
Estimated APC paid: $3,500
OpenAlex ID: W4403732648