Work

Using slow light to enable laser frequency stabilization to a short, high-Q cavity

Year: 2024

Type: article

Abstract: State-of-the-art laser frequency stabilization is limited by miniscule length changes caused by thermal noise. In this work, a cavity-length-insensitive frequency stabilization scheme is implemented using strong dispersion in a 21 mm long cavity with a europium-ion-doped spacer of yttrium orthosilicate. A number of limiting factors for slow light laser stabilization are evaluated, including the inhomogeneous and homogeneous linewidth of the ions, the deterioration of spectral windows, and the linewidth of the cavity modes. Using strong dispersion, the cavity modes were narrowed by a factor 1.6 × 10 5 , leading to a cavity linewidth of 3.0 kHz and a Q factor of 1.7 × 10 11 . Frequency stabilization was demonstrated using a cavity mode in a spectral transparency region near the center of the inhomogeneous profile, showing an overlapping Allan deviation below 6 × 10 −14 and a linear drift rate of 3.66 Hz s −1 . Considering improvements that could be implemented, this makes the europium-based slow light laser frequency reference a promising candidate for ultra-precise tabletop frequency stabilization.

Source: Optics Express

DOI: 10.1364/oe.540133