Work

Broadband Back-Short Transition From Waveguide to Thin Substrate-Integrated Waveguide in Multilayer Substrate in 270-GHz Band

Year: 2024

Type: article

Abstract: A broadband right-angle transition from a rectangular waveguide (RWG) to a substrate-integrated waveguide (SIW) with a small narrow-wall width is proposed in the 270 GHz band. Generally, it is difficult to design a broadband transition from a standard RWG to an SIW with a small narrow-wall width owing to the small characteristic impedance of the SIW. In this study, wideband characteristics are obtained by placing via holes in a multilayer substrate and forming back-short structures, short stubs, and inductive pins. By varying the positions of the via holes, the two resonant frequencies are independently controlled to achieve a broad bandwidth exceeding 26%. To verify this design, back-to-back DUTs (devices under test) were fabricated and measured in the sub-terahertz band. The measured and simulated results are in good agreement. The measured insertion loss is approximately 1.1 dB at a design frequency of 275 GHz, and the measured reflection loss is less than −10 dB from 234 GHz to 308 GHz.

Source: IEEE Journal of Microwaves

DOI: 10.1109/jmw.2024.3481629

Authors: Shumpei Kishi, Yoshiki Sugimoto, Kunio Sakakibara, Nobuyoshi Kikuma

Institution: Nagoya Institute of Technology

Language: English

Topic: Microwave Engineering and Waveguides

Subfield: Electrical and Electronic Engineering

Field: Engineering

Domain: Physical Sciences

Open Access status: gold

Estimated APC paid: $1,995

Funder: National Institute of Information and Communications Technology