Work

Design and Experimental Characterization of a Microfluidic Piezoelectric Pump Utilizing P(VDF-TrFE) Film

Year: 2024

Type: article

Abstract: Advancements in wearable technology and lab-on-chip devices necessitate improved integrated microflow pumps with lower driving voltages. This study examines a piezoelectric pump using a flexible β-phase copolymer poly(vinylidene fluoride-trifluoroethylene) (P(VDF-TrFE)) film. Six samples (S1–S6) were fabricated and subjected to a three-step annealing process to optimize their properties. Characterization was conducted via atomic force microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, impedance analysis, and polarization hysteresis loop measurements. The results show that annealing at approximately 135 degrees Celsius produces a β-phase structure with uniform “rice grain”-like crystallites. A microfluidic pump with a nozzle/diffuser structure, using S4 film as the drive layer, was designed and manufactured. Diaphragm deformation and pump performance were assessed, showing a maximum water flow rate of 25 µL/min at 60 Hz with a peak-to-peak voltage (Vpp) of 60 V. The flow rate could be precisely controlled within 0–25 µL/min by adjusting the Vpp and frequency. This study effectively reduced the driving voltage of the piezoelectric pump, showing that it has significant implications for smart wearable devices.

Source: Coatings

DOI: 10.3390/coatings14121483

Authors: Bei Zhao, Xiaomeng Li, Jing Shi, Huiling Liu

Institutions: Xi'an Jiaotong University City College, Xi'an Jiaotong University, Shanxi Datong University

Language: English

Topic: Dielectric materials and actuators

Subfield: Biomedical Engineering

Field: Engineering

Domain: Physical Sciences

Open Access status: gold

Estimated APC paid: $2,955

Funder: Division of Materials Research