Study of erosion wear by solid particle of a PMMA/SiO2 hybrid coating with graphene oxide applied on a composite laminate
Year: 2024
Type: article
Abstract: This study reports the tribological performance of a family of PMMA/SiO2 hybrid coatings with graphene oxide applied on composite laminate substrates. The transformation from graphite to graphene oxide was carried out using a high-energy mill for 90 minutes. The composite laminates of epoxy resin matrix and layers of bidirectional carbon fiber were obtained through the vacuum infusion process. The coatings were applied on the composite laminates using the dip-coating method. To disperse the graphene oxide in the hybrid solutions, an ultrasonic bath (40 kHz) was used during the immersion of the substrate. Tribological tests of erosive wear by solid particle impact (beach sand) were performed on a horizontal erosion test platform under conditions of pressure of 45 psi, impact velocity of 6 m/s, distance between nozzle and specimen of 10 mm and impact angle of 90°. The results showed that coatings with graphene oxide increase their protection against erosion by 50 (9-PMMA/1-SiO2-2GO) to 54% (9-PMMA/1-SiO2-1GO) more than the coating without graphene oxide. The results obtained could be considered for using this type of coating as an alternative protection on the leading edge of wind turbine blades that are exposed to conditions of erosion wear by solid particle impact.
Language: English
Subfield: Ecological Modeling
Field: Environmental Science
Domain: Physical Sciences
Open Access status: bronze
OpenAlex ID: W4404787006