Work

Natural zeolite/PVC beads for the removal of ammonium ions from water: Wettability, particle size, strength, hydrophilicity and equilibrium behaviour

Year: 2024

Type: article

Abstract: This study developed an improved method for removing ammonium ions from water using natural zeolite/PVC beads. Research gaps relating to the impact of particle size, wettability, robustness, hydrophobicity and equilibrium behaviour were addressed. It was surmised that manipulation of the formation of natural zeolite/PVC beads will improve the performance of these composite materials. First it was noted that water-saturated sorbents exhibited higher ammonium ion exchange rates than dried beads. An air nozzle was proposed as a potential solution for controlling particle size. To control bead particle size, a range of airflow rates passed through an optimised 3D printed nozzle design. Bead diameters from below 0.5 mm up to 2 mm were obtained, with higher airflow rates promoting the growth of smaller beads. 0.5–1 mm beads also were characterised by lower attrition rates compared to larger ≈ 2.7 mm particles (54 to 57 % change) and had almost the same kinetics exchange rate as their regular unbound zeolite powder counterparts (0.4 to 13.5 % difference). The equilibrium data was in the shape of a linear isotherm, which suggested that the ammonium ions were equally dispersed throughout the sorbent and the aqueous solution. Finally, the use of amphipathic copolymer (Pluronic F127) improved the exchange kinetics of the dry beads (42 to 160 % change) but also weakened the structural integrity of the zeolite composites (284 to 647 % change depending on the analysed composites). • Improved the ammonia uptake of natural zeolite/PVC beads. • Noted that activity increased when beads were in a wet state. • Demonstrated a means to control size distribution of natural zeolite/PVC beads. • Recorded low attrition rates for smaller bead sizes which facilitated use. • Discovered that presence of hydrophilic materials weakened bead structure.

Source: Journal of Water Process Engineering

DOI: 10.1016/j.jwpe.2024.106666

Authors: Louis Currie, Dias Hardanti, Graeme J. Millar

Institution: Queensland University of Technology

Language: English

Topic: Adsorption and biosorption for pollutant removal

Subfield: Water Science and Technology

Field: Environmental Science

Domain: Physical Sciences

SDGs: Responsible consumption and production, Clean water and sanitation

Open Access status: hybrid

Estimated APC paid: $3,420