Work

Laser additive manufacturing of Al2O3 and ZrO2-based eutectic ceramic oxide: An overview

Year: 2024

Type: article

Abstract: This review aims to summarize fundamental aspects and recent progress in the production of eutectic ceramic oxide systems, specifically Al 2 O 3 /ZrO 2 systems, using laser additive manufacturing technologies (LAM). As is well-known, the building process of ceramics in LAM carries certain challenges, including the development of thermal stresses, crack formation, and distortion of the samples. Due to these challenges, this review focus on the recent advancements in laser printing of Al 2 O 3 and ZrO 2 based eutectic ceramic oxides. Key process parameters and material properties are thoroughly discussed, with special attention given to critical factors such as characteristics of ceramic powders and printing parameters. In conclusion, this review provides a set of guidelines, along with relevant data, to support the development of ceramic eutectic systems using LAM techniques, such as Laser Powder Bed Fusion (L-PBF) and Direct Energy Deposition (DED).

Source: Journal of the European Ceramic Society

DOI: 10.1016/j.jeurceramsoc.2024.117133

Authors: Rosa Taurino, Stefano Martinuzzi, Elisa Padovano, Stefano Caporali, Federica Bondioli

Institutions: National Interuniversity Consortium of Materials Science and Technology, University of Florence, Politecnico di Torino

Language: English

Topic: Additive Manufacturing and 3D Printing Technologies

Subfield: Automotive Engineering

Field: Engineering

Domain: Physical Sciences

Open Access status: hybrid

Estimated APC paid: $3,900

OpenAlex ID: W4404959998

FWCI: 3.02

Cites: 81

Cited by: 28

Related to: 10