The Influence of Different Hardness of the Tool Material on the Wear of Shm Grinding Wheels and the Specific Energy Intensity of Grinding
Year: 2024
Type: article
Abstract: It was established that conditionally viscous-brittle tool materials (high-speed steels and hard alloys) behave in the same way with an increase in hardness: wheel wear and the specific energy consumption of their grinding decrease. As the hardness of brittle tool oxide-carbide ceramics increases, both wheel wear and the specific energy consumption of grinding, on the contrary, increase. That is, an increase in the hardness of viscous-brittle materials facilitates the separation of elementary chips, less energy is needed for this, and accordingly the wear of the wheel and the specific energy consumption of their grinding are reduced. On brittle ceramics, with increasing hardness, there is no change in chip removal, but harder sludge becomes more abrasive and, as a result, the wear of the wheel and the specific energy consumption of their grinding increase. The conclusion from the literature that hard and less plastic materials require relatively less specific energy for grinding is confirmed by us when comparing materials of approximately the same hardness - hard alloys and ceramics. In ceramics, the energy consumption of grinding is actually four times lower than that of hard alloys.
Authors: Valerii Lavrinenko, Volodymyr Solod, Volodymyr Tyshchenko, Yevgeniy Ostroverkh
Language: English
Subfield: Mechanical Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: diamond
OpenAlex ID: W4405190438