Research on the application of modified cotton fabric as an anti-oil-fouling material in oil-water separation and heavy metal removal
Year: 2024
Type: article
Abstract: Cotton fabric (CF) modified with silica (SiO 2 ), chitosan (CS), and sodium alginate (SA), referred to as PDA/CF/SiO 2 -CS-SA or PCF/Si-CSA, exhibits both superhydrophilic and underwater superoleophobic properties. This dual-function material demonstrates an underwater-oil contact angle (UOCA) exceeding 159.8°. The fabric's surface has minimal oil adhesion, allowing crude oil to be easily removed by water rinsing. When used to treat simulated wastewater containing Cu(II) and oil (10 mg/L Cu(II)), PCF/Si-CSA achieved an oil/water separation efficiency of 99.0%, water flux of 32900 L·m −2 ·h −1 , and Cu(II) removal rate of 91.3 %. The surface of the PCF/Si-CSA of adsorbed Cu(II) leached with a dilute HCl solution, and the Cu(II) desorption rate reached 93 % within 150 s. PCF/Si-CSA shows superoleophobicity under water (UOCA>150°) after 1 mol/L H 2 SO 4 , 0.5 mol/L NaOH, saturated NaCl immersion for 20 days, and abrasion by 500# sandpaper 300 times. Obviously, the dual-function PCF/Si-CSA exhibited good performance for simultaneous oil/water separation and heavy-metal removal.
Authors: Xiaohong Li, Junjie Qin, Ying Chen, Ying Chen, Dong Chen, Quan Wang, Yong Chen, Yong Chen
Language: English
Subfield: Surfaces, Coatings and Films
Field: Materials Science
Domain: Physical Sciences
Open Access status: hybrid
Estimated APC paid: $3,250
OpenAlex ID: W4405220155