Work

Mechanical properties of Ti3SiC2-based composites obtained by spark plasma sintering

Year: 2024

Type: article

Abstract: Composite materials with different contents of the MAX phase Ti 3 SiC 2 were obtained by a two-stage heat treatment of Ti / Si / C and Ti / Si / TiC powder mixtures. Solid phase vacuum sintering and spark plasma sintering (SPS) technologies were used for the heat treatment. The maximum content of Ti 3 SiC 2 was achieved in composites prepared by vacuum sintering the composition 3Ti/1,2Si/2C at 1400 ◦C for 1 h with subsequent consolidation by SPS (1300 ◦C, pressure 50 MPa, holding time 5 min) with addition of 5 wt. % Si. The effect of phase composition and porosity on the mechanical properties of the obtained composites (hardness, flexural strength and elastic modulus) was investigated. The fracture of the composites was characterised as brittle and occurs by a mixed mechanism.

Source: NOVYE OGNEUPORY (NEW REFRACTORIES)

DOI: 10.17073/1683-4518-2024-8-28-34

Authors: E. P. Sedanova, I. E. Arlashkin, S. N. Perevislov, E. B. Kashkarov, M. S. Khorev

Institutions: Tomsk Polytechnic University, Institute of Chemistry of Silicates named after I.V. Grebenshchikov, St. Petersburg State Technological Institute

Language: English

Topic: MXene and MAX Phase Materials

Subfield: Materials Chemistry

Field: Materials Science

Domain: Physical Sciences

Open Access status: hybrid

OpenAlex ID: W4405383922

FWCI: 0.095

Cites: 21

Cited by: 1

Related to: 10