Work

Proposes Geometric Accuracy and Surface Roughness Estimation of Anatomical Models of the Pelvic Area Manufactured Using a Material Extrusion Additive Technique

Year: 2024

Type: article

Abstract: One of the main benefits of using 3D printing in orthopedics is the ability to create custom solutions tailored to a patient’s specific anatomical and functional needs. Conducting a reliable evaluation of the accuracy of the manufacture of anatomical structure models is essential. However, particular standards or procedures still need to be implemented to control the surface quality of anatomical models manufactured using additive manufacturing techniques. Models of pelvic parts made of polylactic acid (PLA) material were manufactured using the Material Extrusion (MEX) additive technique. Subsequently, guidelines were developed to reliably verify the geometric and surface roughness of the 3D printed models using Computer-Aided Inspection (CAI) systems. For this purpose, a measuring arm system (MCA-II) with a mounted laser head and Atos II Triple Scan was used. To inspect surface roughness parameters, procedures were developed for an Alicona InfiniteFocusG4 optical microscope. The results of the geometrical verification of the models are within the tolerance limits of ±0.22 mm to ±0.6 mm. In the case of surface roughness measurement, the highest values for the arithmetical mean height Sa were obtained on the side of the support material, while the smallest values were found along the applied layers. After the metrological control process, the models were used in the planning process for hip surgery.

Source: Applied Sciences

DOI: 10.3390/app15010134