Work

The construction of large-aperture Schottky heterostructures and the study of the reduction properties of heavy metal ions under natural light

Year: 2024

Type: article

Abstract: • The TiO 2 -Ni-NiO Schottky heterojunctions were constructed via one step. • NOT-1-1 has strong absorption of visible light. • The reduction rate of Cu(II) in 15 min was as high as 76.7 %. • The amount of reduction was 433.5 mg/g in 60 min. With the rapid development of industrialization and the reckless discharge of industrial wastewater exacerbating the environmental pollution of water bodies caused by excessive heavy metal ions, the design and preparation of green photocatalysts for the efficient removal of heavy metal ions has attracted much attention. In this study, the one-step construction of lignocellulose-based magnetic photocatalytic composites (NOT-1-1) using lignocellulose as a substrate by a combination of electroless nickel, sol–gel method and high-temperature. The results showed that the hollow pore size of NOT-1-1 was up to 30 μm, and the elements including Ni and Ti were uniformly distributed, which formed TiO 2 and Ni-NiO with Schottky heterojunction structure. The composite layer with Schottky heterojunction structure, which improved the photogenerated electron-hole separation ability, and the forbidden band width was only 1.95 eV. The efficient and rapid reduction of Cu(II) under natural light can be realized, and the reduction rate can reach 76.7 % in 15 min, while it was up to 86.7 % after 60 min, and the reduction amount can reach 433.5 mg/g, indicating that excellent photocatalytic reduction performance can be obtained. This study is of great significance for the removal of heavy metal ions from industrial wastewater.

Source: Materials & Design

DOI: 10.1016/j.matdes.2024.113579