Work

Comparison of Durability and Gamma-Ray Shielding Performance of High-Velocity Oxygen Fuel Tungsten Carbide-Based Coatings on Cold-Rolled Steel Surface

Year: 2024

Type: article

Abstract: This paper provides a comparative evaluation of the mechanical properties, corrosion resistance, and gamma-ray shielding performance of four different types of tungsten carbide (WC)-NiCr coatings deposited on cold-rolled steel surfaces, which are used as materials for low- and intermediate-level radioactive waste (LILW) storage containers. The four types of coatings were classified as WC-85, WC-73, WC-66, and WC-39 according to their WC content and were applied to the cold-rolled steel surfaces using the High-Velocity Oxygen Fuel (HVOF) spraying process. The performance of the layered coatings was analyzed in terms of their microstructure, hardness, wear resistance, adhesion strength, corrosion properties, and gamma-ray shielding characteristics. Coatings with elevated WC contents showed enhanced mechanical properties and gamma-ray shielding effectiveness, whereas coatings with relatively lower WC contents and higher NiCr contents exhibited greater corrosion resistance. This paper discusses the performance of WC-NiCr coatings from the viewpoint of enhancing the durability and safety of commercial LILW storage containers.

Source: Crystals

DOI: 10.3390/cryst15010021

Authors: Yeong-Ho Son, Seung Heon Baek, Beom Kyu Kim, Jeong Ho Hwang, Jae Hun Lee, Geun Dong Song

Language: English

Topic: High-Temperature Coating Behaviors

Subfield: Aerospace Engineering

Field: Engineering

Domain: Physical Sciences

Open Access status: gold

Estimated APC paid: $2,955

Funders: National Research Foundation, National Research Foundation of Korea, Ministry of SMEs and Startups, Ministry of Science and ICT, South Korea

Awards: G2276137425, G2756884775, G7640609146