Work

Specimen and experiment design for on- and off-axis fatigue and self-heating characterization of a woven CF-PEKK composite at low and ultrasonic frequencies

Year: 2025

Type: article

Abstract: This work investigates the fatigue behavior of satin fabric-woven carbon fiber-reinforced poly-ether-ketone-ketone (PEKK) laminates under low (20 Hz) and ultrasonic (20 kHz) testing frequencies using identical specimen geometries. Specimen designs across all orientations were based on modal, harmonic, static-structural, and buckling analyses to ensure comparable results. This design enables uniaxial tension–compression loading of woven carbon-fiber reinforced polymers (CFRPs) to fail in the gauge section without global buckling and ensures overlapping stress amplitudes between the two test systems. The maximum possible stress amplitudes of ultrasonic fatigue testing (UFT) are higher than the lowest stress amplitudes that cause failure in the conventional servo-hydraulic (SH) system. By using the anisotropy of composite laminates, this design was validated through tension–compression experiments on dogbone-shaped specimens with four fiber orientations: 0°, 15°, 30°, and 45°, using SH and UFT systems. Results comparing high-cycle fatigue (HCF) and very high-cycle fatigue (VHCF) behavior of angle-ply laminates indicate a strong dependence on fiber orientation. A comparison of self-heating and microscopic analysis between the two systems demonstrates the applicability of UFT for off-axis VHCF characterization of woven composites. Finally, shear stress-induced damage initiation in 0°fiber-oriented dog-bone-shaped specimens, as observed in this work and reported in the literature, is addressed as a multi-axial stress state problem by incorporating the resultant normal, transverse, and shear stresses into the Tsai–Wu formulation. • The VHCF strength for all off-axis orientations agrees well between two test systems. • Dog-bone shaped CF-PEKK specimen design can endure reversed fatigue without buckling. • Optimal pulse-pause ensures comparable CF-PEKK self-heating at 20 Hz and 20 kHz. • The VHCF damage in woven composites initiates at the surface under uni-axial loading.

Source: Composites Part B Engineering

DOI: 10.1016/j.compositesb.2025.112183

Authors: Aravind Premanand, Hanna Schimmelpfeng, Frank Balle

Institutions: University of Freiburg, Fraunhofer Institute for High-Speed Dynamics, Ernst-Mach-Institut

Language: English

Topic: Mechanical Behavior of Composites

Subfield: Mechanics of Materials

Field: Engineering

Domain: Physical Sciences

Open Access status: hybrid

Estimated APC paid: $5,210

Funder: Carl-Zeiss-Stiftung