Year: 2025
Type: article
Abstract: The current volume and efficiency of high-frequency switching power supplies in power supply system cannot meet practical requirements. Therefore, a modular equipment was studied to optimize the design of PWM rectifiers and DC-DC converters, and corresponding control strategies were adopted. At the same time, experimental verification was performed. The experimental results show that before using the control, there are two large secondary voltage ripples in the PWM rectifier, with an amplitude of approximately 8 V; After using the control, the amplitude was approximately 1 V, a decrease of 87.5%. In addition, the DC-DC converter module may have fluctuations when it is lifted, but the amplitude of the voltage wave remains basically 62 A after steady state. In practical applications, the ripple is controlled at 1 V through the proposed control method, and the actual displayed current is a relatively standard sine wave with a low distortion rate. Meanwhile, compared with other methods, the efficiency of the studied method is as high as 89.110%. Overall, the control strategy proposed by the research institute can effectively control the front and rear modules in theory. In practical applications, it can effectively improve the power output and reduce the pollution in the power grid. It has high effectiveness and feasibility in practical industrial application.
DOI: 10.4108/ew.4241
Author: Lijuan Zhang
Institution: Jilin Technology College of Electronic Information
Language: English
Topic: Advanced DC-DC Converters
Subfield: Electrical and Electronic Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: diamond
OpenAlex ID: W4407226834