Impact of comammox process on membrane-aerated biofilm reactor for autotrophic nitrogen removal
Year: 2025
Type: article
Abstract: • Model-based comparative analysis on comammox-exclusive/inclusive MABRs. • Up to ∼88 % TN removal with < 0.06 % N 2 O production via comammox bacteria-based PN/A. • Moderate HRT of 4.0 d and biofilm thickness of ≥ 300 μm assured MABRs’ performance. This study compared the simulation results of the side-stream membrane-aerated biofilm reactor (MABR) in terms of total nitrogen (TN) removal and N 2 O production obtained by the conventional comammox-exclusive biological nitrogen removal (BNR) model and the novel BNR model with comammox-related model structures/parameters. Even though the conventional comammox-exclusive MABR obtained >85 % TN removal over a wide range of substrate conditions and achieved up to ∼92.0 % TN removal, it suffered from 0.90 %-4.80 % N 2 O production. Comparatively, despite the significantly lower N 2 O production (0.01 %-0.06 %), due to the undesired full nitrification of comammox bacteria, the novel comammox-inclusive MABR failed to provide adequate nitrite for anammox bacteria under exceeding substrate conditions and only obtained the maximum ∼88.0 % TN removal through comammox bacteria-based partial nitritation/anammox. Both MABRs should be operated at a moderate hydraulic retention time (e.g., 4.0 d) with a sufficient biofilm thickness (e.g., ≥300 μm) to attain efficient TN removal and reduced N 2 O production.
Source: Water Research X
Language: English
Subfield: Pollution
Field: Environmental Science
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $3,943
Awards: G3154756938, G4521108349, G806260092
OpenAlex ID: W4407319517