Get started
Work

Numerical Analysis of Roll Hydrodynamic Coefficients of 2D Triangular Cylinder Using OpenFOAM

Year: 2025
Type: article
Abstract: Predicting the roll damping coefficient of a ship is a crucial factor in determining the dynamic stability of the vessel. However, a nonlinear analysis that considers the viscosity of the fluid is required to accurately estimate the roll damping coefficient. This study numerically analyzed the hydrodynamic coefficients related to the roll motion of ships, focusing on the eddy-making damping coefficient. A series of forced vibration tests were conducted on a two-dimensional triangular cylinder floating on the water surface. The overset method and the volume-of-fluid method were applied, and the governing equations were solved using the open-source software OpenFOAM v2106. Uncertainties in the grid size and time intervals were identified through the International Towing Tank Conference (ITTC) procedure, and the obtained hydrodynamic coefficients were compared with available experimental data and potential flow results. Additionally, eddy-making damping was extracted from the shed vortex for various excitation frequencies and amplitudes. The study found that the uncertainty in the roll damping coefficient was less than 8%, with eddy-making damping being the dominant factor influencing the results. Numerical results showed a good agreement with experimental data, with an average deviation of 4.4%, highlighting the importance of considering nonlinear effects at higher excitation amplitudes. Comparison with experimental data and empirical formulas revealed that the nonlinearity due to the excitation amplitude must be considered in empirical formulations.
DOI: 10.3390/jmse13030391
Authors: Eunchong Hwang, Kyung-Kyu Yang
Language: English
Open Access status: gold
Estimated APC paid: $3,137
OpenAlex ID: W4407786665
FWCI:
Cites: 23
Cited by:
Related to: 10