Work

Enhanced Compressive Properties of Additively Manufactured Ti-6Al-4V Gradient Lattice Structures

Year: 2025

Type: article

Abstract: Lattice structures are widely used in the aerospace and biomedical fields, due to their lightweight, high specific strength, large specific surface area, good biocompatibility, etc. However, the balancing of the weight and the mechanical properties remains a challenge in designing lattice structures. Combining experiments and simulations, the present work first designs and evaluates the mechanical properties of uniform and gradient topology-optimized Ti-6Al-4V lattices with the same overall porosity of 84.27%, employing finite element simulations. Then, laser powder bed fusion technology is used to fabricate the uniform and gradient Ti-6Al-4V lattices, and their compressive performance is tested. The results indicate that, under longitudinal compression, the gradient lattice structure exhibits good layer-by-layer collapse deformation behavior, achieving better comprehensive performance than the uniform lattice structure. While under horizontal compression, the deformation behavior of the gradient lattice structure is similar to that of the uniform lattice structure, and the deformation is mostly randomly distributed. The cumulative energy absorption of the gradient lattice structure increased by approximately 20% compared with that of the uniform lattice structure. The results provide a technical basis for the integrated design of structural and functional components for aerospace applications.

Source: Metals

DOI: 10.3390/met15030230