Influence of Vertical/Spanwise Offsets on Aerodynamic Performance of Double Serpentine Nozzles
Year: 2025
Type: article
Abstract: Serpentine exhaust systems, known for their infrared and radar stealth capabilities, are becoming standard in flying wing aircraft. However, their design is constrained by the fuselage layout, causing potential offsets between the engine and nozzle exit axes. Developing a universal, high-performance serpentine nozzle design that accommodates various vertical and spanwise offsets (ΔZ, ΔY) presents a significant challenge. A series of ‘Preferred Nozzles’ and ‘Modest Nozzles’ were designed and numerically evaluated to assess the impact of these offsets on flow characteristics. Results show that the ‘Modest Nozzle’ exhibits a complex wave system and significant local losses in the constant-area extension section when subjected to ΔZ > 0.10D0 (D0 is the nozzle inlet diameter) or ΔY > 1.0D0, leading to a rapid thrust coefficient decrease. Vertical offsets significantly affect the Preferred Nozzle’s aerodynamic performance. When ΔZ = −0.50D0, a large vertical offset in the first ‘S’ section creates a recirculation zone, causing significant losses and reducing the thrust coefficient to around 0.96. When ΔZ ≥ −0.25D0, gas flow and wall shear stress distributions transition smoothly. When ΔZ ≥ 0.10D0, as the spanwise offset increases, the thrust coefficient experiences only a 0.17% loss and remains above 0.97.
Source: Aerospace
Authors: Xuyong Zhang, Yong Shan, Jingzhou Zhang
Institution: Nanjing University of Aeronautics and Astronautics
Language: English
Subfield: Computational Mechanics
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $2,896
OpenAlex ID: W4407845779