Work

Self-standing films of medical grade PLA/PEG copolymers for guided bone regeneration

Year: 2025

Type: article

Abstract: Both resorbable and non-resorbable membranes are intensely investigated as barriers materials for guided bone regeneration (GBR) due to their biodegradability and biocompatibility. To optimize their performance in bone regeneration, the chemical, physical, and biological properties of these membranes must be precisely engineered, balancing mechanical strength and controlled degradation. In this study, self-standing films for GBR applications were developed from medical-grade PLA/polyethylene glycol (PEG) copolymers. The films were prepared by spin coating of copolymer inks that included dichloromethane as a solvent, and hydroxyapatite (HA) and polyethylene glycol (PEG) chains as additives. The resulting films exhibited a thickness of 120–150 μm, a disordered arrangement of the copolymer chains, and initial poor toughness. The incorporation of PEG increased the toughness and hydrophilicity of the films and accelerated their degradation while HA improved their bioactivity but compromised their mechanical properties. The combination of HA and PEG produced films with a favorable balance between mechanical integrity and bioactivity. Cytocompatibility was confirmed with MC3T3-E1 pre-osteoblastic cells, supporting the potential of these films for GBR applications. Osteogenic differentiation was reduced in films lacking HA, whereas HA substantially improved osteogenesis by serving as adhesion nodes for differentiated cells. • Spin coating produce films with micrometric, reproducible thickness and surface porosity. • PLA/PEG processing reduces its crustallinity, leading to tensile strength reduction. • PEG, as an additive, increases the toughness, hydrophilicity and resorption rate. • HA greatly increases cell proliferation and differentiation but hinders resorption. • Combination of both additives lead to favorable toughness and osteogenic properties.

Source: Next Materials

DOI: 10.1016/j.nxmate.2025.100561

Authors: Ricardo Rojas, Juan P. Zanín, Rocío Martínez, German A. Gil

Institutions: Consejo Nacional de Investigaciones Científicas y Técnicas, Universidad Nacional de Córdoba, Research Centre in Biological Chemistry of Córdoba

Language: English

Topic: Bone Tissue Engineering Materials

Subfield: Biomedical Engineering

Field: Engineering

Domain: Physical Sciences

SDG: Good health and well-being

Open Access status: gold

Estimated APC paid: $1,280