Work

Sensitivity Analysis of 3D Printing Parameters on Mechanical Properties of Fused Deposition Modeling-Printed Polylactic Acid Parts

Year: 2025

Type: article

Abstract: This study investigates the influence of various printing parameters on the tensile, compressive, and bending stiffness of fused deposition modeling (FDM)-printed polylactic acid (PLA) parts through a comprehensive full factorial design of experiment. Key factors, including infill percentage, infill pattern, number of outer shells, and part orientation, were systematically varied to quantify their impact on mechanical performance. A total of 36 parameter combinations, selected based on a literature review and experimental feasibility, were tested using standardized specimens: beams for bending, cylinders for compression, and dogbones for tensile testing. Mechanical tests were performed according to ISO 5893:2019, employing a 1 kN load cell to determine stiffness and elastic modulus. The results indicate that the number of outer shells and infill density are the most influential parameters, whereas infill pattern and part orientation have a minor effect, depending on the loading condition. This study provides a novel and robust evaluation of the interactions between key printing parameters, offering new insights into optimizing the mechanical properties of FDM-printed parts. These findings establish a foundation for further optimization and material selection in future additive manufacturing research.

Source: Applied Mechanics

DOI: 10.3390/applmech6010017

Authors: Marta Mencarelli, Mattia Sisella, Luca Puggelli, Bernardo Innocenti, Yary Volpe

Institutions: University of Florence, Université Libre de Bruxelles

Language: English

Topic: Additive Manufacturing and 3D Printing Technologies

Subfield: Automotive Engineering

Field: Engineering

Domain: Physical Sciences

SDG: Industry, innovation and infrastructure

Open Access status: gold

Estimated APC paid: $1,448