Year: 2024
Type: article
Abstract: Spinning factory consumes highest amount of electrical power than Weaving, Knitting, Dyeing and Garment unit of Textile Industry. A typical spinning unit of 20000 spindles requires about 2 Megawatt (MW) connected power to run the process machinery. Power is also a major cost component of yarn production after raw materials and hence reduction of power cost is an utmost concern for the management of spinning unit. This investigation aims to reduce power consumption of Ring frame using Plastic T-in cylinder. 2850 meters length of a 30 Ne yarn fineness was spun in a Ring frame with T-in cylinder, and the same length of that yarn was also produced by a Ring frame with Metallic T-in cylinder from the same feed material (Roving). Power consumption was measured by a Digital power meter during the production of yarn at different set lengths. The power consumption was 39.5 KWH and 37.3 KWH corresponding to Metallic and Plastic T-in cylinder. The reduced power consumption suggests that the setting up of new spinning unit can be considered to be designed with Ring frame with Plastic T-in cylinder.
DOI: 10.63261/ijmet111
Institution: Bangladesh University of Textiles
Language: English
Field: Energy
Domain: Physical Sciences
Open Access status: bronze
OpenAlex ID: W4408064312