Research Results of Heat and Mass Transfer in Conditions of Weak Aerodynamic Coupling with Pulsating Ventilation Mode
Year: 2025
Type: article
Abstract: Introduction. The issue of heat dissipation in metallurgy is significant due to potential hazards to personnel and the environment. Effective control and management of thermal processes require additional measures and can prevent fires, explosions, and personnel injuries as well as it is a key factor in ensuring the safety and reliability of metallurgical equipment. Metallurgical processes often involve high temperatures, but control over them is necessary for successful steel melting and processing. Current methods of heat transfer control (aeration, general exchange and local ventilation) do not always effectively reduce heat loads to acceptable levels. The choice of a pulsating ventilation mode for increasing the efficiency of heat transfer control is due to two main reasons: low air flow rates in large metallurgical production facilities, and the presence of numerous hard-to-reach areas with heat-generating equipment. The aim of this research is to investigate heat and mass transfer processes in areas with weak aerodynamic coupling with pulsating ventilation mode. Materials and Methods. To achieve this goal, a method of physical modeling was employed to collect statistical data. Heat and mass transfer were evaluated by measuring temperature changes over time at various points in the model niche under different ventilation conditions (stationary and. pulsating). System analysis was then applied to process the collected data. Research Results. It was found that pulsating air movement had a positive effect on heat and mass transfer in poorly ventilated spaces inside the laboratory setup. The degree of efficiency of this effect was determined, and it was found that the use of pulsating ventilation slowed down the increase in temperature in the center of the space by 3.8 times compared to the use of general forced ventilation. Discussion and Conclusion. The data obtained under the simulated conditions of the aforementioned type of production provide a foundation for developing a more specific methodology to counteract the negative effects of heat radiation. This methodology could significantly enhance safety by improving the removal of excess heat in low-aerodynamic areas of mining and metallurgical workshops.
Institution: National University of Science and Technology
Language: English
Subfield: Safety, Risk, Reliability and Quality
Field: Engineering
Domain: Physical Sciences
Open Access status: diamond
OpenAlex ID: W4408067732