Tailoring multiporous carbon nanomaterials via electrospun polyacrylonitrile block copolymers: Effects of composition and processing on morphology and porosity
Year: 2025
Type: article
Abstract: This study presents a method for producing multiporous carbon nanomaterials using high-molecular-weight polyacrylonitrile- b -poly(butyl acrylate) (PAN-b-PBA) block copolymers synthesised via atom transfer radical polymerization (ATRP). The precursors were processed into nanoparticles or nanofibers by electrospinning. The resulting multiporous structure arises from both the microscale morphology of the electrospun materials and the mesoporous architecture templated by the block copolymer, where the sacrificial degradation of the PBA segment during carbonization creates additional porosity. This study examines the effects of varying PAN and PBA block lengths, as well as processing parameters, particularly solution ageing, on fibre and particle morphology and porosity. High-molecular-weight PAN-Br is essential for obtaining a spinnable solution capable of forming nanofiber precursors, whereas low-molecular-weight precursors tend to form nanoparticles via electrospray. The results indicate that ageing the electrospinning solution increases the fibre diameter and transitions the structure from smooth-porous to rough-porous, likely due to physical crosslinking and intermolecular interactions in concentrated solutions. This transformation was also observed in films cast from the aged solutions. Additionally, a higher PBA content promotes phase separation, enhancing the porosity of both the precursor and carbonised fibres, and yielding materials with increased surface areas. This investigation highlights the critical role of the solution parameters and processing conditions in controlling the structure and properties of carbon nanofibers, offering insights into the tailored design of multi-porous carbon nanomaterials with specific morphologies. • Production of multi-porous carbon nanomaterials, ranging from nanoparticles to nanofibres. • Control of the porous structure using block copolymer templating and electrospinning. • Investigation of solution ageing effects on the evolution of the porous structure. • Tailoring specific multi-porous structures by varying both block lengths and solution processing parameters.
Source: Polymer
Authors: David Sibanda, Peter E. Mallon
Institution: Stellenbosch University
Language: English
Subfield: Biomaterials
Field: Materials Science
Domain: Physical Sciences
Open Access status: hybrid
Estimated APC paid: $3,980
Award: G6380765409
OpenAlex ID: W4408093278