Innovative Device to Control Self-Induced Instabilities Associated with the Swirling Flow from the Discharge Cone of Hydraulic Turbines
Year: 2025
Type: article
Abstract: In our previous research work, we investigated different methods to mitigate the vortex rope that appears in the draft tube of a Francis turbine when it operates at off-design operating points. The most promising results were obtained for a method involving an axial jet of water. The minor disadvantage of this method was the high value of the flow rate of the water jet. Our present work focuses on another method that decreases the value of the flow rate of the jet. In this sense, a new device has been developed that produces a pulsating water jet, which mitigates the pressure fluctuations associated with the swirling flows. The objective of this paper is to use our experimental test rig to validate the efficiency of a pulsating water jet in mitigating the vortex rope. To perform that, pressure measurements were carried out at four test levels to evaluate the pressure amplitude evolution when the pulsating jet was deployed. From preliminary investigations, the results indicate that this method leads to a decrease of the pressure amplitude of the vortex rope, with a lower value of the flow rate of the jet.
Source: Actuators
DOI: 10.3390/act14030126
Institution: Politehnica University of Timisoara
Language: English
Subfield: Mechanics of Materials
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $2,896
Award: G8336137826
OpenAlex ID: W4408200216