Work

Thermal-hydraulic performance enhancement of ellipsoidal dimpled U-tubes with different bend curvatures

Year: 2025

Type: article

Abstract: U-tubes are an integral part of most compact heat exchange systems. The efficiency of these systems is governed by the thermal and fluid flow characteristics of the U-tubes. Dimpled tubes are widely known for the performance improvement in straight tubes. However in U-tubes, with inherent secondary flow and detachment at bends, dimples add complexity to heat and fluid flow. Therefore, this study was focused on the numerical investigation of the thermal-hydraulic performance of ellipsoidal 0-degree, and 45-degree dimpled U-tubes with short and long radius bends, under the constant external heat flux of 10 kW/m 2 , for Reynolds number range of 5000 ≤ Re ≤ 40,000. A steady-state implicit numerical methodology including SST k-ω turbulence model was adopted. It was observed that Ellipsoidal 0-degree and 45-degree dimpled U-tubes altered Dean vortices substantially and induced early attachment in the post-bend sections which enhanced the heat transfer rate significantly. As compared to the smooth tube, the long-radius Ellipsoidal 0-degree dimpled U-tube enhanced thermal-hydraulic performance by 35.3 % while the short-radius U-tube the Ellipsoidal 45-degree improved the heat and fluid flow performance by 45.4 %. The 0-degree dimpled long-radius U-tube performed better at higher Re , while the 45-degree dimpled short-radius U-tube was more effective at lower Re . • Symmetric and asymmetric dean vortex patterns generated in dimpled U-tubes. • Dimples in U-tubes induce early flow reattachment due to secondary flow modification. • Performance improvement of short radius ellipsoidal-45° dimpled U-tubes at moderate Re. • High thermal-hydraulic performance of long radius ellipsoidal 0° dimpled U-tube at high Re.

Source: International Communications in Heat and Mass Transfer

DOI: 10.1016/j.icheatmasstransfer.2025.108814

Authors: Rizwan Sabir, Muhammad Mahabat Khan, Nadeem Ahmed Sheikh, Muhammad Imran, Muhammad Wakil Shahzad

Institutions: Capital University of Science and Technology, International Islamic University, Islamabad, Aston University, Northumbria University

Language: English

Topic: Heat Transfer Mechanisms

Subfield: Mechanical Engineering

Field: Engineering

Domain: Physical Sciences

Open Access status: hybrid

Estimated APC paid: $3,560

Funders: Northumbria University, UK Research and Innovation, British Council