Get started
Work

Quantification and evaluation of strain reduction from small-bubble gas injection in Spallation Neutron Source target vessels

Year: 2025
Type: article
Abstract: Small-bubble gas injection has been utilized in the operation of Spallation Neutron Source (SNS) mercury targets since 2017 to mitigate cavitation-induced erosion damage to target vessels. Strain measurements of the target vessel collected in-situ during initial operation with gas injection were used to study the gas injection effect on the structural response of targets to proton pulses. A significant strain reduction owing to gas injection was found by comparing the strain measurement data during operation with and without gas injection. The research presented here focuses on quantifying strain reductions in SNS targets and evaluating the effect of small-bubble gas injection by comparing different bubbler types and target designs. The strain measurement results show the gas injection significantly reduced strain in SNS target vessels; strain values decreased by 30% to 80% for targets operating with gas injection. Stress and strain responses of SNS targets were simulated to numerically evaluate the gas injection effect. Based on the predicted stresses with and without gas injection, the fatigue lifetimes of SNS jet-flow design target were estimated using fe-safe fatigue analysis software. The simulations show these reductions should improve the fatigue life of target vessels and allow SNS targets to meet their fatigue design goal.
DOI: 10.1016/j.matdes.2025.113797
Language: English
Open Access status: gold
Estimated APC paid: $3,650
OpenAlex ID: W4408327532
FWCI: 0.321
Cites: 30
Cited by: 1
Related to: 10