The Influence of Friction Stir Welding Parameters on Axial Force and Mechanical Properties of AA6061-T6 Using Taguchi Method
Year: 2025
Type: article
Abstract: This research investigates the influence of friction stir welding (FSW) parameters on the axial force and mechanical properties, specifically: ultimate tensile strength and Vickers hardness, of AA6061-T6 aluminium alloy using Taguchi experimental design. The study explores various combinations of four factors: rotation speed, welding speed, dwell time, and preheat temperature, each factor with three levels and two replicated, resulting in 18 experiments. The FSW experiments conducted using a CNC machine with parameters derived from the Taguchi experimental design yielded a maximum ultimate tensile strength of 295.66 MPa and a peak Vickers hardness of 81.32 HV. Dynamometer measurements indicated that an average axial force of approximately 2 kN during the welding process produced the most favorable ultimate tensile strength results. Moreover, an analysis of the factors using the Taguchi experimental method, focusing on the signal-to-noise ratio, indicated that to achieve the highest response values, the levels of the factors should be adjusted as follows: a rotation speed of 1250 rpm, a welding speed of 900 mm/min, a dwell time of 20 seconds, and a preheat temperature of 200°C.
Source: Materials science forum
DOI: 10.4028/p-z9h2hp
Authors: Chonnikan Wongkasae, Adirek Baisukhan
Institution: Chiang Mai University
Language: English
Subfield: Mechanical Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: hybrid
OpenAlex ID: W4408410441