Work

Crude oil production and simulation from catalytic fast pyrolysis of waste polyethylene terephthalate (PET)

Year: 2025

Type: article

Abstract: Polyethylene terephthalate (PET), a thermoplastic polymer, is the main raw material in the manufacturing of clear bottles used mainly for water and soft drinks. In 2022, the world plastics production was 400.3 million tons; around 6.2 % corresponds to PET, and only 10 % of it is recycled. PET waste can only be recycled four times because high temperatures generate chemical and physical degradation. This study aims to apply the principles of circular economy to transform PET waste into crude oil through fast catalytic pyrolysis, under N 2 atmosphere at different temperatures and with different quantities of zeolite as a catalyst. The crude oil was characterized by Fourier-transform infrared spectroscopy (FTIR) and solution quantitative 13 C nuclear magnetic resonance ( 13 C NMR). To compare the test results, a simulation for the pyrolysis reactor was conducted with CHEMCAD software. The result of FTIR analysis showed the presence of carboxylic acids and aliphatic hydroxyl groups, and 13 C NMR also shows presence of aromatic C–C and C–O bonds, aliphatic C–O and C–C bonds and carbonyl groups. The experimental results, which were comparable to the simulation, also show that a ratio of 12.5 % zeolite catalyst to waste PET helps the decomposition process and reduces the operating temperature needed in the reactor. There is a positive strong correlation between the reactor temperature and pressure. The highest product yield obtained was 20 % crude oil, 7 % solid powder, 16 % pyrolysis char, and 57 % non-condensable gases. • Pyrolysis process correlation between temperature and pressure. • Influence of temperature and catalyst amount on the yield and crude oil composition. • Waste PET flakes pyrolysis process simulation with CHEMCAD software. • Crude oil production at laboratory scale comparison with simulation. • Design of a laboratory-scale fixed bed fast catalytic pyrolysis unit with gas treatment system.

Source: Cleaner Engineering and Technology

DOI: 10.1016/j.clet.2025.100928

Authors: E. Avalos-Ortecho, G. Power-Porto, S. Ponce Alvarez, M. Gelmi-Candusso, C. Pardo-Martinez, G. Concha-Oblitas

Institutions: Universidad de Lima, Universidad del Rosario

Language: English

Topic: Thermochemical Biomass Conversion Processes

Subfield: Biomedical Engineering

Field: Engineering

Domain: Physical Sciences

SDG: Responsible consumption and production

Open Access status: gold

Estimated APC paid: $2,220