Piezoelectric Ball Milling Treatment of PFAS-Laden Spent Resins
Year: 2025
Type: article
Abstract: Anion exchange resins (AERs) have been widely used for the removal of per- and polyfluoroalkyl substances (PFAS) from water. However, regardless of whether AERs are regenerable or single-use, the disposal of end-of-life AERs presents significant challenges. Conventional waste management strategies, such as landfill disposal and incineration, are increasingly under scrutiny and may face impending bans due to environmental concerns. This study introduces a non-thermal, solvent-free process for the effective destruction of PFAS on AERs by co-milling piezoelectric boron nitride (BN) powders with contaminated AERs and stainless steel (SS) balls. The approach demonstrated the destruction of PFOS and achieved 80% defluorination when applied to two types of AERs (PFA694E and AmberLite IRA 67) pre-loaded with PFOS. Comprehensive targeted PFAS analysis and suspect screening analysis of transformation products elucidated the reaction mechanisms and confirmed that the functional groups of AERs did not participate in the reaction. The process’s effectiveness was further validated in treating field-collected single-use AERs (PFA694 and AmberLite PSR2 Plus) contaminated with PFAS mixtures of varying chain lengths and head groups. After treatment, PFAS levels on the AERs were reduced to below ng/g detection limits, and no PFAS release was observed in standard leaching tests.
Authors: Jinyuan Zhu, Nanyang Yang, Sujan Fernando, Alan Rossner, Thomas M. Holsen, Yang Yang
Institution: Clarkson University
Language: English
Subfield: Environmental Chemistry
Field: Environmental Science
Domain: Physical Sciences
Open Access status: green
Award: G1626137107
OpenAlex ID: W4408657487