Experimental Study on the Hygrothermal Effect of Incorporating Phase-Change Materials in Cob Construction
Year: 2025
Type: article
Abstract: Faced with the current challenges of the energy transition and the quest for sustainable materials, biobased materials are attracting growing interest for their environmental and thermal properties. Cob is well known for regulating humidity and improving thermal comfort in buildings. A building’s thermal inertia can be increased by integrating phase-change materials (PCMs), enabling energy storage. This study explores the integration of microencapsulated PCMs into biobased materials considering realistic environmental conditions during experimental tests. The results show a homogeneous thermal distribution with low temperature variation at different locations. The relative humidity results confirm a one-dimensional thermal and hygroscopic distribution. The material with PCMs exhibits better thermal regulation. It retains more heat on the outside and reduces indoor temperature variations, improving thermal insulation. Measurements show that PCM integration contributes to reducing wall thermal conductivity and increases its thermal capacity, reaching 2.6 times during phase transition. The simulation is conducted with real 96 h Normandy climate data (January and August) for conventional and biobased walls incorporating PCMs. The results show that winter heat losses are highest for conventional walls (−44.08 kWh/m2), low for cob walls (−24.17 kWh/m2), and lowest for cob walls with PCMs (−13.17 kWh/m2). In summer, all walls exhibit the lowest heat gain, while adding PCMs stabilizes heat flux, reducing peak summer heat flux from 150 W/m2 to 50 W/m2. The results show that the addition of PCMs significantly improves thermal and hygroscopic performance.
Source: Buildings
Language: English
Subfield: Building and Construction
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $3,137
OpenAlex ID: W4408810107