Umbrella-Like Dual-Axis Mirror Scanner Fabricated With FDM 3D Printing and Its Application in Realizing a Dynamic FOV Camera
Year: 2025
Type: article
Abstract: In this paper, we demonstrate a low-cost mirror scanner design of umbrella-like architecture. The primary structures are 3D-printed using PLA (polylactic acid) as the material. A 400 mm2aluminum–deposited silicon chip is fixed on the mirror frame, which is part of the 3D-printed assembly, and serves as the reflective mirror. Miniature permanent magnets are embedded in the mirror frame so that the mirror can then be electromagnetically driven. Our latest-version scanner reaches optical scan angles of 7.8 and 7.4 degrees for the x- and y-scans at their resonant frequencies (37 Hz and 49 Hz), respectively. Under DC actuation, a full optical scan range of 10.1 degrees in the x- direction can be achieved when the voltage is tuned from +12 V (+0.089 A) to −12 V (−0.089 A). Additionally, we will demonstrate its integration with a smart phone camera to achieve a dynamic FOV (field of view).
Source: IEEE photonics journal
Authors: Ming-Te Chiang, Yi-Wen Cheng, Wei-An Tsui, Pin-Hung Yeh, Ching-Kai Shen, Jui-che Tsai
Institution: National Taiwan University
Language: English
Subfield: Electrical and Electronic Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $2,075
OpenAlex ID: W4408852286