Work

Effect of bar diameter and cover thickness on bond behavior of steel bar in high-strength SHCC under pull-out condition: Experimental study and efficient finite element modeling

Year: 2025

Type: article

Abstract: Engineered/Strain-Hardening Cementitious Composites (ECC/SHCC) are highly attractive for tensile/shear-critical regions in reinforced concrete structures due to their high tensile ductility and excellent crack control capacity. To ensure effective stress transfer, a sufficient bond between steel bars and SHCC is crucial, particularly for high-strength SHCC. This study experimentally and numerically investigates the bond behavior between deformed steel reinforcing bars and high-strength SHCC through a direct pull-out approach. Steel bars with different diameters (D = 20/25/32 mm) and cover thicknesses (1D, 1.5D and 2D) were examined, with a fixed bond length of 4D. The block materials included conventional concrete and high-strength SHCC with compressive strength of 112 MPa, tensile strength of 8.6 MPa and tensile strain capacity >5 %. The findings demonstrated that SHCC can prevent the propagation of cracks, thereby maintaining the integrity of the bond. The bar diameter itself does not significantly affect the bond strength, while increasing the cover thickness from 1D to 2D effectively increases the peak loads and bond strength. A relatively simple but efficient finite element model was established, and the simulation showed good agreement with test results. These findings improve the understanding of bond characteristics of deformed steel bars with high-strength SHCC and facilitate the design of reinforced SHCC members. • Direct pull-out approach was used to investigate bond properties between deformed steel bars and high-strength SHCC. • Steel bars with different diameters (20–32 mm) and cover thicknesses (1–2 times of bar diameters) were examined. • Block materials include conventional concrete and high-strength SHCC with 8.6 MPa tensile strength and >5 % tensile strain capacity. • A relatively simple but efficient finite element model was established for the pull-out performance. • Finite element simulation showed excellent correlation with test results in terms of peak loads and failure modes.

Source: Journal of Building Engineering

DOI: 10.1016/j.jobe.2025.112471

Authors: Haroon Younas, Jing Yu, Christopher K.Y. Leung

Institutions: Hong Kong University of Science and Technology, University of Hong Kong

Language: English

Topic: Structural Behavior of Reinforced Concrete

Subfield: Building and Construction

Field: Engineering

Domain: Physical Sciences

SDG: Industry, innovation and infrastructure

Open Access status: hybrid

Estimated APC paid: $3,940