Get started
Work

Corrosion characteristic of multi-ring shield tunnel containing rubber concrete invert-filling under direct stray current

Year: 2025
Type: article
Abstract: • The corrosion mechanism of shield tunnel containing rubber particles was studied. • The coupling analysis of electric-chemical field in composite material was realized. • A full-scale experiment was conducted to verify the accuracy of numerical model. Stray current can cause corrosion of underground structural rebar, adding rubber particles to the invert-filling concrete is an effective prevent method to reduce stray current corrosion. In our research, the corrosion calculation model of multi-ring shield tunnel containing rubber concrete invert-filling was established, the coupling analysis of electric field and chemical field in composite structures was realized through mesoscale simulations, and the accuracy of calculation model was verified by full-scale test. Through calculation, the corrosion characteristic of segment rebar and bolt of multi-ring shield tunnel were investigated under different rubber content. The result shows that adding rubber particles to the invert-filling can not only reduce the corrosion current density of segment rebar and tunnel bolt effectively, but also affect the distribution form of rebar corrosion current density in both circumferential and longitudinal directions. When the rubber content increases from 5% to 20%, the maximum corrosion density of segment rebar and tunnel bolt will decrease from 31% to 58% and 30% to 32%, respectively. Under different stray current leakage modes, when the rubber content and input voltage are the same, the segment and bolt corrosion current density under single rail-two points leakage mode is greater than that in the two rails-single point leakage mode.
DOI: 10.1016/j.undsp.2025.01.002
Language: English
Open Access status: diamond
OpenAlex ID: W4409072475
FWCI: 3.013
Cites: 42
Cited by: 8
Related to: 10