Analyzing the cross-sensitivities of a zeolite-based ammonia sensor for SCR systems for application in the flue gas of biogenic waste combustion
Year: 2025
Type: article
Abstract: In many applications for exhaust gas aftertreatment, ammonia is added to the flue gas as a reducing agent for nitrogen oxide (NO x ) emissions. An effective dosing control is necessary to avoid low NO x conversion or ammonia slip. The here-investigated capacitive zeolite-based sensor helps to monitor the concentration of ammonia in the flue gas. For the specific application of biomass combustion plants, preliminary sensor investigations have been carried out in the laboratory. Special emphasis was given on investigating cross-sensitivities that could be caused by the large number of other components in the flue gas. An impressing selectivity was found. By adjusting the composition of the zeolite functional film and the operating temperature, the remaining small influences of NO x and water vapor could be even further reduced. The described sensor concept should be an ideal solution for improving the NO x aftertreatment efficiency. • Biomass combustion systems face increased requirements for flue gas aftertreatment. • Selective ammonia sensors are required to control AdBlue dosing for NO x reduction. • Cross-sensitivities influence the accuracy of the concentration determination. • Cross-sensitivities can be reduced by improving the sensor setup and operating mode.
Source: Sensors and Actuators B Chemical
Authors: Thomas Wöhrl, Ralf Moos, Gunter Hagen
Institution: University of Bayreuth
Language: English
Subfield: Electrical and Electronic Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: hybrid
Estimated APC paid: $5,010
Award: G3933967052
OpenAlex ID: W4409075114