Get started
Work

The Influence of Selected Solid Lubricants on the Wear of the Rolling–Sliding Interface in the Wheel–Rail System According to the Standard PN-EN 15427-2-1:2022

Year: 2025
Type: article
Abstract: This article presents the influence of lubricant on selected tribological properties of the rolling-sliding association, i.e., the wheel-rail system. Three solid lubricants were tested: soybean grease, molybdenum disulfide and graphite grease. Under specific operating conditions, a beneficial influence of lubrication of the above-mentioned friction node was observed. This is valuable information for rolling stock owners, track operation or maintenance workers when making decisions about lubrication or its absence on a given section of railway track. In this way, tangible financial benefits (savings) are obtained by extending the durability of the wheel rim and rail, and, through extended periods of wheel set reprofiling, we significantly reduce operating costs. Solid lubricants (lubricating sticks) intended for the lubrication of railway wheel flanges must meet the requirements specified in the PN-EN 15427-2-1:2022 standard. Annex H. The wear patterns were observed and analyzed using both optical microscopy and scanning electron microscopy (SEM) combined with energy-dispersive X-ray spectroscopy (EDS). The test results indicate that graphite is characterized by the lowest and most stable coefficient of friction over time, which makes it the most effective lubricant in terms of friction reduction. Soybean grease also shows stability and a low level of friction, but with a slight increase in value over a longer period of time. However, grease containing molybdenum disulfide, despite its initial effectiveness, loses its lubricating properties over time, resulting in a significant increase in friction.
Source: Materials
DOI: 10.3390/ma18071672
Language: English
Open Access status: gold
Estimated APC paid: $3,137
OpenAlex ID: W4409208251
FWCI: 1.205
Cites: 10
Cited by: 4
Related to: 10