Electrically actuated 4D printed hybrid copper fiber-carbon black reinforced composites
Year: 2025
Type: article
Abstract: This study aims to optimize the recovery performance of electrically actuated 4D-printed customized biomedical devices by incorporating copper fibers and carbon black into various composite formulations. After extensive experimentation, six composite formulations were selected for testing under electrical actuation at two current levels: 2 A and 3 A. Results indicate that higher carbon black concentrations (0.2 %) and increased current from 2 A to 3 A significantly improved performance. The optimal composition, consisting of 20 % copper fiber and 0.2 % carbon black, achieved the highest recovery ratio of 95 % at 3 A, along with an almost 11 °C reduction in actuation temperature, highlighting its suitability for adaptive biomedical devices. While at 2 A, the same composition exhibited a recovery ratio of 76 %. Furthermore, the examined samples exhibited notable fixity ratios, ranging from 98 % to 100 %. These outcomes highlight the substantial impact of both composite material formulation and the electrical current level on optimizing recovery performance. • 4D printing of the hybrid metal-carbon reinforced composites. • Successful electrical actuation of the 4D printed composites. • Reaching a 95 % recovery ratio upon using electrical actuation. • Improving the shape memory effects by applying higher electrical current.
Source: Polymer Testing
Institutions: Furtwangen University, University of Freiburg
Language: English
Subfield: Mechanical Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $3,370
OpenAlex ID: W4409264887