Get started
Work

Anisotropy and Strain Rate Sensitivity of Additively Manufactured Polymer Composites in Tension and Compression: Effects of Type and Orientation of Fibres

Year: 2025
Type: article
Abstract: Comprehensive analysis of the anisotropic nature of additively manufactured (AM) parts caused by their fabrication method requires attention, as current quasi-static experiments on AM specimens are used to determine strength and stiffness. This study investigates the anisotropic mechanical behaviour of AM polymer composites reinforced with short and continuous carbon fibres, examining various filament orientations, loading directions and strain rates. Utilising the fused deposition modelling (FDM) technique, nylon and carbon fibres were fabricated into composites with controlled orientations. Mechanical tests were conducted in different directions to assess the tensile and compressive properties of these composites, with results showing enhanced tensile strength and stiffness in continuous-fibre (CF) composites compared to short-fibre (SF) ones, particularly in longitudinal orientations. The compressive behaviour revealed complex effects of type and orientation of reinforcing fibres, with CF composites demonstrating superior stiffness but lower strength than SF composites in specific orientations. Strain rate sensitivity analysis for the least anisotropic (quasi-isotropic) cases indicated that tensile strength decreased slightly with the increased strain rate while compressive strength increased. These findings underline the critical effect of fibre orientation and type on mechanical properties and suggest potential applications of AM composites in scenarios demanding tailored anisotropic behaviours, including structural optimisation and numerical modelling for various loading conditions.
DOI: 10.3390/jcs9040186
Language: English
Open Access status: gold
Estimated APC paid: $2,172
OpenAlex ID: W4409438997
FWCI: 0.742
Cites: 43
Cited by: 3
Related to: 10