Work

Study on the Factors Affecting the Drainage Efficiency of New Integrated Irrigation and Drainage Networks and Network Optimization Based on Annual Cost System

Year: 2025

Type: article

Abstract: With the frequent occurrence of extreme weather events worldwide, the compound frequency of drought and flood events has significantly increased, imposing multidimensional pressures on agricultural water resource management. Agricultural water consumption accounts for approximately 70%, with severe waste, as a large amount of water is lost during transmission and distribution. Faced with increasingly severe and frequent extreme weather, traditional drainage systems may become unsustainable. Identifying the factors influencing drainage time is crucial for efficient drainage. The MIKE URBAN model has significant potential in farmland waterlogging simulation and drainage network optimization. This study validated the model’s accuracy based on infiltration well overflow capacity experiments, with Average Relative Error (ARE) values of 2.29%, 6.52%, 4.41%, 3.17%, 4.37%, and 5.69%, demonstrating good simulation accuracy. The MIKE URBAN model was used to simulate drainage networks, explore factors affecting drainage time, establish an annual cost system for the drainage network, and optimize the network using a genetic algorithm with the objective of minimizing annual costs. Research findings: There is a clear negative correlation between the maximum inflow of infiltration wells and drainage time. As inflow increases, drainage becomes faster, but beyond 0.0075 m3/s (27 m3/h), the efficiency gains level off. This indicates that selecting infiltration wells with at least a 20% opening ratio is essential. Similarly, increasing the collector’s diameter enhances drainage efficiency significantly, though the effect follows a diminishing return pattern. While smaller lateral spacing improves local water collection, it may lead to flow congestion if the collector is undersized; conversely, larger spacing increases drainage paths and delays, even if the collector is large. An optimal spacing range of 100–150 m is suggested alongside the collector diameter. Lateral diameter also affects performance: increasing it reduces drainage time, but the benefit plateaus around 200 mm, making further enlargement cost-ineffective. The genetic algorithm helped to optimize the drainage network design. Utilizing the genetic algorithm, the drainage network was optimized in just 15 iterations. The fitness function value rapidly decreased from 351,000 CNY to 55,000 CNY and then stabilized, reducing the annual cost from 59,640.67 CNY to 45,337.86 CNY—a 24% savings—highlighting the approach’s effectiveness in designing efficient and economical farmland drainage systems. This study has shown that the simulation-based optimization of drainage networks provides a more rational and cost-effective approach to planning drainage infrastructure.

Source: Water

DOI: 10.3390/w17081201

Authors: Zhiwei Zheng, Mingrui Li, Tianzhi Wang, Hejing Ren

Institutions: Tianjin Agricultural University, Tianjin University, China Institute of Water Resources and Hydropower Research

Language: English

Topic: Engineering and Agricultural Innovations

Subfield: Aquatic Science

Field: Agricultural and Biological Sciences

Domain: Life Sciences

SDGs: Clean water and sanitation, Sustainable cities and communities

Open Access status: gold

Estimated APC paid: $3,137